how to paint panel doors

How to Paint Panel Doors without Brush Mark Expert Opinions-2024

Facing interior designing house issues because your panel doors are unpainted and old now? Don’t worry! Painting this door is helpful to make them looks beautiful as they are newly installed. This post provided detailed information on How to Paint Panel Doors without Brush Mark quickly by following some essential steps.

Are you still thinking if I can paint a penal door? YES, it’s dead easy to paint the interior doors to get a fresh and new look to your home. Select the best paint made explicitly for the panel doors and follow the guide about the best way to paint a panel door which is mentioned in this post.

How to Paint panel doors without brush mark
How to Paint panel doors without brush mark

Step-by-Step Process to Paint Panel Doors

Here is the Step-by-Step Process to Paint Panel Doors which is given below in details:

Step 1: Remove the Door from the Hinges

Most people don’t prefer to remove the door from its place and paint them directly with their jointed hinges. It’s good only if your door is not old enough and a professional painted look at the end is not your primary purpose.

However, if your panel door is too old and also beautiful look is your main concern, i recommend removing the door from the hinges.

Remove the door from the hinges
Remove the door from the hinges

You can use any device available at home, which allows you to untighten the hinges from the door perfectly. A screwdriver or a drill is a good choice. Once you have separated the door and hinges, now keep the door in a different place where you want to start the painting process.

Step 2: Tape the Areas you want to Keep Unpainted

Now tape those areas which you want to keep unpainted. These areas mainly include a door hinge, doorknob, or a lock on the door. Additionally, any accessory connecting the door with a wall or using it for decoration must be taped.

This step is also necessary to prevent locks from damaging out permanently. In my experience, any lock hurdle can create significant issues. Don’t cut the tape directly; and then apply it on the surfaces. Instead, apply the largest sections of the tape and once the area is covered now, cut it with the help of a knife or any other sharp device.

Tape the areas you want to keep unpainted
Tape the areas you want to keep unpainted

Step 3: Cleaning and Preparing the Panel Door

Cleaning and preparing the panel door are essential and basic steps for painting the panel door smoothly. Firstly, remove all the dust and unwanted particles from the door surface. A neat and clean door is straightforward to paint compared to a rough one. Use sandpaper to remove sand and other unwanted particles.

Cleaning and Preparing the Panel Door
Cleaning and Preparing the Panel Door

120 to 150- grit sandpaper is ideal for this purpose. Don’t worry if you can’t arrange it; using an old brush is an alternative choice. When you use a brush, you may need to use a vacuum to remove the dust and sand particles quickly.

Once you have completed the cleaning process, wash the door with warm water and allow it to dry.

Step 4: Apply a Primer

A primer makes the door surface shiny and helps to get a solid grip on the door and paint. Apply the primer with the help of a spray bottle (although most primers are available in a spray bottle). And you can also arrange a spray bottle at your home quickly.

Apply a Primer
Apply a Primer

Note: Although multiple primers are available in the market for this purpose. Using an oil-based primer is what we recommend based on our experience. An oil-based primer is readily available in the market. Just stir the primer bottle and start applying it on the door in a vertical way.

KILZ 2 Multi-Surface Stain Blocking Interior/Exterior is a good primer. It is available at affordable prices and is made explicitly for the penal doors. It can cover 300 feet of surface area with one can at a time. KILZ 2 primer is easy to use and has good adhesion power with wood, metal doors and other common materials in our home. It is an oil-based primer, and i recommend using it with an oil-based paint.

Step 5: Apply the Paint

It is the last attention-grabbing step in painting a panel door. Before applying the paint, you need to make sure that you have enough time. Don’t start it in a rush, and apply paint on the panel door when you are entirely free from any other work.

Start applying the paint with a roller because it covers more area at a time. Apply paint with the help of a roller on one side at the first surface and complete it. Don’t make the mistake of applying paint on the other side until the first one is completed.

Apply the Paint
Apply the Paint

Firstly, complete paint on the top two panels of a side. After this, apply the paint on the lower same side. Once the first side of the door is painted well, now apply the paint to the second side of the door.

Once the door is painted fully, allow it to dry for 2-5 hours. And see if the results are promising. If you want extra shine, apply a second coat of paint once the first coat is dried. Once the door is dried, install it back with the hinges using the same devices you used to uninstall.

All the oil-based paints and latex paints are suitable to use for the interior and paneled doors. Rust-Oleum 7777502 Protective Enamel Paint is excellent for paneled and interior doors for different materials. It offers a black color finish, and you can also keep the finish with your interior painting design patterns by mixing it with other paints.

The feature which makes it considerable to buy among many other paints are its good adhesion ability, resistance against chemicals and fading color issues, and its fast drying process.

How to Paint Panel Doors without Brush Mark

Yes, you can paint if the door is not too old. If the door is too old and needs heavy painting work, always paint it by separating it from the hinges.

It’s easy to paint the door without brush marks using a paint roller instead of a brush. A paint roller does not leave any spots or streaks.

Respraying a car requires time and heavy work. It costs around $1500 to $3000 in total and also depends upon the size of the car.

Yes, it’s good to use foam rollers for painting penal doors. One thing you should keep in mind is applying the two paint coats when using a foam roller because it’s too thin. So for a shiny finish, we recommend using two coats of paint.

To get a wood-like appearance is accessible on the door. Just select the paint color which looks like wood and follow the above steps.

Conclusion – How to Paint Panel Doors without Brush Mark

Painting the paneled doors becomes easy once you follow the above-mentioned steps. If you want to make your paneled door look professional and new, follow this step-by-step guide. Don’t use any extra chemicals to enhance the shiny appearance, as it may lead to long-term door damage issues.

If you have any questions about painting panel doors, feel free to ask anytime. I are always here to answer your queries.